Nippon Singapore Gold Paint


Gold Paint is a low odour, water-based acrylic paint which can be applied to concrete, gypsum, wood and metal to provide a gold effect finish

Features : Water-based acrylic paint
Finish : Low Gloss

Application Data
METHOD: Roller, brush and spray


Touch Dry – 1-2 hours at 30°C
Hard Dry – 2-4 hours at 30°C

OVERCOATING TIME: 2-4 hours minimum at 30°C

Surface Preparation

Masonry Wall

Ensure surface is clean, dry and stable using the following suggested surface treatments:

  • Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
  • Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
  • Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
  • Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
  • Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler

The surface of the substrate must be:

  • Clean/Dry
  • Free for grease/oil
  • Free from rust/foreign matter
  • Free from unstable old film

Exposed metal must be primed with:
Non-ferrous: Hi-Vinyl 1102 CF Etching Primer
Ferrous: Aqua Primer Sealer Undercoat

Prepare by sanding to establish a smooth clean surface which is then applied with 1-2 coats of Aqua Primer Sealer Undercoat depending on wood species.