Nippon Singapore Vinilex 5170 Wall Sealer

Description:

Vinilex 5170 is an Oil-based Wall Sealer containing a superior resin/binder specifically formulated to protect the finishing coats against the effects of alkalinity and moisture from the walls. It contains a blend of solvents that enables it to penetrate deeply and gives a firm base for subsequent coats.

PACKING : 1,5 & 20 litres
COLOUR : White
FINISH : Matt
USES : As a sealer for internal and external masonry surfaces

  • Cement plaster
  • Brickwork
  • Hard/ Soft boards
  • Gypsum
  • Concrete

FEATURES :

  • Excellent alkaline resistance
  • Efflorescence resistance to prevent discolouration
  • Good adhesion on masonry substrates
  • Able to prevent resurfacing of stain marks on problem substrates
  • Anti-fungus and algae resistance property

METHOD : Brush, roller or spray
THEORETICAL COVERAGE : Approximately16 m2/litre (based on 30 microns DFT)
DILUTION : No dilution is necessary for best performance

DRYING TIME :
Surface Dry = 20 minutes at 30⁰C
Hard Dry = 2 hours at 30⁰C
OVERCOATING TIME : 5 hours in normal conditions

Surface Preparation
Ensure surface is clean, dry and stable using the following suggested surface treatments:

  • Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
  • Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
  • Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
  • Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
  • Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler

The information given is intended to give a description of the product performance under specific test conditions. Nevertheless, we cannot assume any responsibility for the use of it since circumstances under which the products are applied in practice are subjected to many variations. We reserve the right to alter the given data without notice.