Nippon Singapore Mozzieguard


MozzieGuard is a special coating with insecticide encapsulated in the polymer for interior use. It has excellent knockdown property against Aedes aegypti mosquitoes through contact. It offers consumers a safe and convenient solution to fend off the mosquito and provide protective benefits to the community.

FINISH : Soft Sheen

  • Ideally suited for internal new & repainting masonry surfaces, such as cement, plastered walls and fiber boards.
  • Can also be used on areas like void decks and common corridor
  • It is also suitable on other properly primed surfaces
    Not recommended to be use on unprimed surfaces such as fresh concrete, mortar
    or plaster.


• Excellent knockdown property against Aedes aegypti mosquitoes
• Durable & washable film
• Good stain resistance
• Good fungus & mould resistance
• Good hiding
• Free from lead and mercury, low odour
• Easy application and touch-up
• DEET- Free
• NEA registered
• Environmentally friendly paint certified under Singapore Green Building Product Certification Scheme

METHOD : Roller or brush
THEORETICAL COVERAGE : 10 – 12 m2/ litre (35 microns DFT)
DILUTION : No dilution is necessary for best performance
SURFACE PREPARATION : Ensure surface is clean, dry and stable using the following

Suggested surface treatments:

  • Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
  • Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
  • Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
  • Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
  • Hairline cracks: Fill cracks with suitable exterior grade waterresistant putty or fillerDRYING TIME : Touch Dry – 30 minutes at 30 oC

OVERCOATING TIME : 2 hours minimum based on normal conditions

• 1 coat 5101 Odour-less Sealer or any recommended Paint Sealer
• 2 coats MozzieGuard

CLEANING : All equipment should be cleaned with water immediately after use.

SOLID CONTENT : 56 ± 2% by weight (based on white)
SPECIFIC GRAVITY : 1.35 ± 2% by kg/litre (based on white)
PACKING : 5 litres and 20 litres
STORAGE : Store in a tightly sealed container in a cool dry place.
SHELF LIFE : Up to 24 months in a tightly sealed container.